Case IH DC133

CaseIH Rotary Disc DC133

Rotary Disc Mower Conditioners


DC133 Disc Mower Conditioners Features:

The Most Reliable Rotary Disc Cutterbed Anywhere

  • A modular cutterbar design with superior crop flow, resulting in less streaking
  • A heavy-duty frame and rugged canopy that have a cantilevered design for smooth crop flow across the cutterbar
  • Shock hubs, now standard on all four models of DC2 rotary disc mowers
  • Roll and flail conditioning options available on all models


Shock Hubs

​Shock hubs are now standard on all four models of DC Series rotary disc mower conditioners. The system replaces the drive hub of discs with a shock hub, making in-field repairs fast and easy.
  • Helps prevent time-robbing, expensive field failures when an obstruction is encountered
  • Shock hub “takes the blow” from collisions with rocks and debris
  • Protects internal components of the cutterbed

Disc Modules

  • Bearings, gears and lubricant for each disc module are individually sealed — damage to one module does not spread to another
  • Modular design ensures complete gear lubrication, even when cutting on slopes
  • Two heavy-duty knives on each disc spin at 3000 rpm to slice through heavy crops
  • Knives are reversible for twice the cutting life
  • One bolt per knife allows for quick flipping or replacing of knives from the front of the cutterbed — without raising the header
  • The steep profile design lifts the crop directly into conditioning rolls
  • Discs are austempered for extra hardness and durability in punishing conditions

Bale or Chop Sooner

  • ​Spiral steel-on-steel or rubber-on-rubber conditioning rolls provide fast drydown
  • Saves time in the field by clearing slugs automatically
  • Allows for easy changes in conditioning intensity
  • Custom-built windrows or swaths
  • Spread the crop out in a wide, fast-drying swath
  • Form the crop into a narrow, fluffy windrow that’s ready for baling or chopping
  • All adjustments to the swathboard, windrow shields and fluffing baffle can be made without tools​

Conditioning Rolls

  • Torsion-bar design
  • Applies equal force to the upper conditioning roll arms
  • Provides uniform conditioning, regardless of crop thickness
  • Intermeshing spiral conditioning rolls have superior crimping and crushing action for faster drydown
  • Rubber-on-rubber conditioning rolls are standard on DC92, DC102 and DC132
  • Rugged steel-on-steel rolls are standard on DC162, optional on DC102 and DC132
  • Easily handle higher crop volume and faster ground speeds
  • No-tools crank adjustment
  • Changing conditioning roll pressure is quick and easy for greater productivity
  • The system releases pressure when the upper roll reaches its maximum opening

Flail Conditioning

  • Now available with all models.
  • Uses tapered flails to pick up crop and rub it together and against the conditioning hood
  • Faster drydown because the waxy layer on the stems is removed and moisture is released quickly
  • Straight flails release crop more easily than competitive systems
  • Produce a more uniform crop mat that lays on top of the stubble
  • Results in better air circulation in the windrow and more thorough drying
Make Case IH
Model DC133
Tongue Type Center Pivot
Cutter Bar  
Cutting Width, ft in (m) 13' (3.96)
Cutting Height, in (mm) 0.95 to 3.2 (24 to 81) std; to 4.5 (115) opt.
Cutter Bar Tilt Angle, degrees -2 to -10
Cutter Bar Lubrication Individually sealed gearboxes
Number of Discs 8
Number of Knives per Disc 2
Disc Speed, rpm 3000
Disc Cutting Diameter, in (mm) 24.3 (617)
Disc Drive Components Bevel gears
Flotation Vertical & lateral, adjustable springs
Windrow / Swath Width, in (mm) Swath 96 (2438), Windrow 36 to 96 (914 to 2438)
Conditioner Type Roll or Flail
Conditioner Drive 4 HB V-belt & gears
Roll Conditioner  
Roll Length, in (mm) 125 (3175)
Roll Diameter, in (mm) 10.4 (264)
Roll Speed, rpm 740
Roll Material Type Molded rubber
Alternate Roll Material type Steel
Roll Surface Pattern, standard Chevron intermeshing
Flail Conditioner  
Rotor Length, in (mm) 125 (3175)
Rotor Diameter, in (mm) 22 (560)
Rotor Speed, rpm 1011 std; 726 opt.
Number of Flails 100
Flail Shape Tapered
Tractor Requirements  
Tractor PTO Minimum Hp (kW) 90 (67)
PTO Rated Speed, rpm 1000
Hookup to Tractor drawbar Drawbar swivel hitch optional
Hookup to Tractor Hitch Lift Arms 2-point swivel hitch optional
Tractor Hitch size Category 2 or 3 drawbar, or Cat. 3, 3-pt hitch
Number of Hydraulic Remotes 2
Hydraulic Relief Pressure, psi (bar) 1500 (103)
Transport Width, ft-in (m) 13' 2" (4.01)
Transport Length, ft-in (m) 21' 3" (6.48) max.
Transport Height, ft-in (m) 6' 8" (2.03)
Ground Clearance, in (mm) 18 (457)
Weight w/ Roll Conditioner, lbs (kg) 5,800 to 6,080 (2631 to 2758)
Weight w/ Flail Conditioner, lbs (kg) 5,680 to 5,960 (2576 to 2703)
Tire Size 31 x 13.5-15, 8PR
Sales Literature  
Literature number HF-56142-13
Literature date 6/1/2013
Operator's Manual  
Manual Number --
Manual Date --
Entry Date  
Manufacturing Status Current
First Entry Date 7/1/2013
Revision Date --

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.