Case IH Farmall 75N

Farmall 75N

Farmall N Series

 

Farmall N Platform

The platform on both Farmall N Cab and ROPS models is ISO mounted to reduce noise and vibration. Features include:

  • An ergonomic operator environment for long days in the seat
  • A tilt and telescoping steering column for optimal positioning and fatigue-fighting operation
  • A digital instrument cluster that monitors PTO and ground speed for accurate spraying and dusting operations

 

ROPS

Farmall N ROPS Models Feature:

  • An adjustable vinyl seat with operator's-presence sensor and retractable seat belts
  • A foldable mid-mounted roll bar that lets you maneuver under low-hanging vines

Cab

Farmall N Cab Models Feature:

  • Heating and air conditioning to keep you comfortable
  • Two external air filters that remove allergens and dust and provide a continuous supply of fresh air
  • Tinted glass for superior visibility
  • A deluxe cloth seat with operator’s-presence sensor and retractable seat belt for your safety
  • Two wide doors for easy access from either side
  • Front and rear windows that open fully
  • A rear cab access panel and separate access point to route harnesses or cables

 

Engine and Axle Options

Engine Options

All Farmall® N Series tractors are powered by a 4-cylinder Tier 3-compliant diesel engine that's clean burning, fuel efficient and features:

  • 2.9 L (179 CID) on the Farmall 75N
  • 3.9 L (238 CID) on the Farmall 95N and 105N
  • Bosch fuel injection

Axle Options

The Farmall 75N is avialable with 2WD or MFD axles. The Farmall 95N and 105N are MFD only

  • A 55-degree turn angle on both the MFD and 2WD axles provides maximum maneuverability in tight spaces
  • The standard differntial lock on rear axles provides added traction in slippery, tough conditions
  • Up to 11 degree axle oscillation provides smooth travel over rough terrain.​​

Transmissions

Transmission Options
Case IH offers two transmission options on the Farmall N Series tractors. Both transmissions provide:

  • More convenience and speeds than found on a typical utility tractor
  • Extra-slow speeds, including three gears below 1 mph (1.6 kph) for precise movement in tight quarters
  • Optional hydraulically engaged wet clutch for smoother performance
  • Digital ground-speed display ideal for spraying, fertilizing and planting

 

16 X 16 Standard Transmission

Standard 16x16 transmission with mechanical shuttle provides:

  • Four speeds in each of four ranges
  • The ability to shift from forward to reverse in any gear with a synchronized mechanical shuttle lever
  • A shuttle lever located on the left, freeing your right hand for other controls
  • A top speed of 17 mph (30 kph), depending on tires
  • An independent parking brake

32 X 16 Power Shuttle

Optional 32x16 Power Shuttle Transmission

  • Eliminates the need to clutch
  • Ideal for loader-intensive applications
  • Wet clutch pack helps extend the Power Shuttle life
  • The Power Shuttle control is located on the left side of the tilt/telescoping steering column, leaving your right hand free to work implement controls
Make Case IH
Model Farmall 75N Narrow
Engine Performance  
Advertised Engine Power, Rated, hp (kW) 76 (56.7)
Maximum Engine Power, hp (kW) Same as advertised
Rated Engine Speed, rpm 2300
Power Boost, hp (kW) No Boost
Fuel Tank capacity, gal (L) 20 (77)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) No DEF
PTO Performance  
PTO Horsepower, Basic / Optional Transmission, hp (kW) 62 (46.2)
PTO Speeds, rpm 540 std; 540 / 1000 opt.
PTO operational Type (Independent; Live; Continuous) Independent
Basic Engine  
Engine Make Case IH FPT
Engine Model 3.2 L
Number of Cylinders 4
Displacement, cu in (L) 195 (3.2)
Engine Bore, in (mm) 3.90 (99)
Engine Stroke, in (mm) 4.095 (104)
Block Design, Replaceable Liners Parent bore block
Aspiration, Turbocharged or Naturally Aspirated Turbocharged, intercooled
Fuel System  
Fuel System Description Rotary-Distributor Type
Fuel System Control, Electronic or Mechanical Mechanical
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment  
Emission Level, US EPA Tier Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) No
Exhaust Gas Recirculation (EGR) No
Diesel Oxidation Catalyst (DOC) No
Diesel Particulate Filter (DPF) No
Exhaust Pipe, Vertical stack or Horizontal Horizontal
Cooling System  
Fan Drive Type Belt
Electrical System  
System Rating, Volts 12
Alternator Rating, Amps 120
Basic Transmission Configuration  
Manufacturer's Description 16 x 16 w/Mechanical Shuttle
Transmission Type 4 Synchronized Speeds in 4 Ranges
Number of Forward / Reverse Speeds 16F / 16R
Maximum Speed Forward, mph (kph) 18.3 (29.5)
Creeper Range Available See option w/Creeper
Shuttle (Forward-Reverse) Available Standard
Optional Transmission 1  
Manufacturer's Description 32x16 Power Shuttle
Transmission Type Power Shuttle with Hi/Lo
Number of Forward / Reverse Speeds 32F / 16R
Optional Transmission 2  
Manufacturer's Description Optional Creeper; 44x16
Transmission Type Shuttle + Creeper
Number of Forward / Reverse Speeds 44F / 16R
Wheel or Track Configuration  
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks 2WD opt. / 4WD std.
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer Front Steer
Rear Axle Assembly  
Final Drive Location and Description Inboard planetary
Axle Output End, Flange or Bar Flange
Axle Bar Diameter, in (mm) No bar axle
Front Axle  
Suspended Front Axle Available No
Brakes  
Service Brake Type Wet disc
Hydraulic System  
Hydraulic System Type Open Center
Main Hydraulic Pump Type Dual Gear
Implement Pump Flow, gpm (Lpm) 12.7 (48.1)
Optional Pump Flow, gpm (Lpm) 16.9 (64)
Number of Standard Remote Valves 2 std, 3rd opt.
3-Point Hitch Features  
3-Point Hitch Category Category 1 / 2
Optional Hitch Category No option
Draft Sensing or Lift Control Draft Control optional
Draft Link Ends Adjustable Fixed
3-Point Hitch Lift Capacity  
Standard Lift Capacity 24 Inches behind pin, lb (kg) 4,400 (1998)
Optional Lift Capacity 24 Inches behind pin, lb (kg) No option
Standard Lift Capacity at lift pin, lb (kg) np
Optional Lift Capacity at lift pin, lb (kg) No option
Drawbar  
Drawbar Description Swinging
Wheelbase / Trackbase  
Wheelbase, 2WD, in (mm) 80.1 (2035)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) 81.1 (2060)
Length  
Length, 2WD, incl. Hitch/Drawbar, in (mm) 152 (3861)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) 153.5 (3900)
Vertical Dimensions  
Height to Top of Cab, in (mm) 90.7 (2303)
Height to Top of ROPS raised, in (mm) 87 (2210)
Width w/Tires or Tracks  
Overall Width, with standard wheels or tracks, in(Mm) 53.5 (1359) MFD minimum
Weight (w/Tires or Tracks)  
Weight, 2WD w/ROPS, lb (kg) 5,027 (2280)
Weight, MFD/4WD w/ROPS, lb (kg) 5,560 (2540)
Weight, 2WD w/Cab, lb (kg) 5,334 (2420)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) 5,886 (2670)
Weight, Total allowable, w/maximum ballast, lb (kg) np
Tire / Track Size  
Front Tire Size, 2WD 6.00-16, 8 ply F2
Front Tire Size orTrack Width, MFD/4WD or Track 7.50 R18, R1
Rear Tire Size or Track Width 14.9 R28; 380/85 R28, R1
Sales Literature  
Literature Number CIH5210904
Literature Date 05/01/2009
Operators Manual  
Operators Manual Number --
Operators Manual Date --
Product Manual  
Product Manual Number TA-1356-13
Product Manual Date 09/01/2013

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.