New Holland H7330

H7330 large

Discbine Disc Mower-Conditioners


Turn standing crop into fast-drying windrows or swaths with amazing speed using one of New Holland's Discbine® disc mower-conditioners. They slice through thick, tangled wet crops and mow through fire ant hills or gopher mounds without missing a beat. The Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through more than 15 feet at a time.

Model H7330
New Holland-Disc Cutterbar  
Type MowMax™ True Modular Disc Cutterbar
Width of Cut, ft. in. (m) 10' 4" (3.2)
Number of discs 8
Number of knives 16 (2 per disc)
Disc Speed, rpm 3000
Cutting angle 2 to 10 degrees
Hydraulic Cutting angle control Standard
Standard Cutting height
skid shoe, in. (mm)
Standard 0.95 to 3.2 (24 to 81)
Fixed Raised, high-
stubble skid shoe
Optional 2.25-4.5 (57-114)
Adjustable Raised, high-
stubble skid shoe
BioMass skid shoe -
Ground clearance with
header fully raised, in. (mm)
17" (432)
Cutterbar Flotation Vertical and lateral, adjustable springs
QuickMax™ Knife
Change System
ShockPro™ Disc Drive
Hub protection system
MowMax™ 3-year
cutterbar protection plan
Chevron-Design Roll Conditioner  
Chevron-Design Roll Conditioner -
Type -
Roll Length, in. (mm) -
Roll Diameter, in. (mm) -
Roll Drive -
Roll Speed, rpm -
Roll Pressure System -
Conditioner Intensity
LeaningEdge™ Flail Conditioner  
LeaningEdge™ Flail Conditioner Standard
Number of LeaningEdge flails 100
Semi-Swinging Leaning
Edge flail design
Rotor Diameter, in. (mm) 22 (560)
Standard Speed, rpm 1000
Optional Slow Speed, rpm 718
Drive. 4 HB V-belt
Conditioner Intensity Adjustment. Single crank adjustable rotor hood
Optional Textured Hood Liner Kit Optional
Standard Drawbar Optional
Drawbar Swivel Hitch Optional
2-pt Swivel Hitch Optional
Height, Transport, ft. in. (m) 5' 8" (1.7)
Height, Operating, ft. in. (m) 4' 5" (1.3)
Width, Transport, ft. in. (m) 11' 3" (3.4) with standard drawbar hitch
Width, Operating, Std.
Drawbar Hitch, ft. in. (m)
16' 0" (4.6)
Width, Operating 2-pt
Swivel Hitch, ft. in. (m
Width, Operating
Drawbar Swivel Hitch, ft. in. (m)
Length, Transport,
Standard Drawbar Hitch, ft. in. (m)
17' 7" (5.3)
Length, Transport, 2-pt
Swivel Hitch, ft. in. (m)
20' 3'' (6.2)
Length, Transport,
Drawbar Swivel Hitch, ft. in. (m)
20' 3'' (6.2)
Length, Operating,
Standard Drawbar Hitch, ft. in. (m)
17' 8" (5.4)
Length, Operating, 2-pt
Swivel Hitch, ft. in. (m)
19' 10" (6.0)
Length, Operating
Drawbar Swivel Hitch, ft. in. (m)
19' 10" (6.0)
Weight, Operating lbs. (kg) 17' 8" (5.4)
Drive 540 rpm PTO, enclosed gears and four HB belt
Drive Protection  
Drive Protection Slip clutch and over-running clutch
Hydraulic swing Standard (double-acting cylinder)
Operating Position Side-Pull, Right Side
Hydraulic lift Standard (operated by two single-acting cylinders; master/slave)
Hydraulic tilt Optional (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge  
Swath, ft. (mm) 7 (2134)
Windrow, ft. (mm) Adjustable from 3 to 7 (914 to 2134)
Wide Thin Fin Kit (100 % Coverage) Optional
Operating, mph (kph) 0 to 9 (0 to 14.5)
Transport, mph (kph) 20 (32)
Tractor Requirement  
Tractor Requirement 80 PTO hp (60 kW) or greater with standard ASAE Category II drawbar.
Hydraulic valves All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights
Tubeless Ag Rib Implement Tires  
Size 9.5L x 14 6PR

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.