New Holland H7560 (PRIOR MODEL)

H7560 large

Discbine Disc Mower-Conditioners

 

BUILT FOR FAST CUTTING AND QUICK DRYDOWN
Turn standing crop into fast-drying windrows or swaths with amazing speed using one of New Holland's Discbine® disc mower-conditioners. They slice through thick, tangled wet crops and mow through fire ant hills or gopher mounds without missing a beat. The Discbine line ranges from seven-disc models that cut a nine-foot swath up to 12-disc models that sweep through more than 15 feet at a time.

Type

Flail system with 100 tapered flails and optional textured hood liner

Length, in. (mm)

102 (2591)

Diameter, in. (mm)

22 (560)

Drive

4 HB V-belt

Speed, rpm 

1000 std or optional 726

Conditioner Adjustment

Adjustable rotor hood with replaceable smooth liner
Dimensions  

Height, Transport, ft. in. (m)

6' 8" (2.6)

Height, Operating, ft. in. (m)

5' 8" (1.7)

Width, Transport, ft. in. (m)

15' 9" (4.8) with 2-pt swivel hitch or drawbar swivel hitch

Width, Operating, ft. in. (m)

24' 11" (7.6) with 2-pt swivel hitch

Width, Operating, ft. in. (m) 

23' 3" (7.1) with drawbar swivel hitch

Width, Operating, ft. in. (m)  

 

Length, Transport, ft. in. (m)

30' 5" (9.3) with 2-pt swivel hitch

Length, Transport, ft. in. (m) 

29' 5 in. (8.7) with drawbar swivel hitch

Length, Transport, ft. in. (m)  

 

Length, Operating, ft. in. (m)

25' 2" (7.7) with 2-pt swivel hitch

Length, Operating, ft. in. (m) 

24' 2" (7.4) with drawbar swivel hitch

Length, Operating, ft. in. (m)  

 

Weight, Operating lbs. (kg)

6,380 (2894)
Drive  

 

1000 rpm PTO, enclosed gears and four HB belt
Drive Protection  

  

Slip clutch and over-running clutch
Hydraulics  

Hydraulic swing

Standard (double-acting cylinder)

Hydraulic lift

Standard (operated by two single-acting cylinders; master/slave)

Hydraulic tilt

Standard (operated by single-acting cylinder and incorporated into the lift system)
Material Discharge  

Swath, ft. (mm)

8 (2438)

Windrow, ft. (mm)

Adjustable from 3 to 8 (914 to 2438)
MowMax™Cutterbar with ShockPRO™Hubs  

Number of discs

12

Number of knives

24 (2 per disc)

Speed, rpm

3000

Cutting width, ft. in. (mm)

15' 7" (4795)

Cutting angle

2 to 10 degrees, hydraulic control

Cutting height, in. (mm)

0.95 to 3.2 (24 to 81) with standard skid shoes

Ground clearance with header fully raised, in. (mm)

18 (457)

Flotation

Vertical and lateral, adjustable springs
Speeds  

Operating, mph (kph)

0 to 9 (0 to 14.5)

Transport, mph (kph)

20 (32)
Tractor Requirement  

   

100 PTO hp (74.5 kW) or greater with Category III drawbar or Category III 3-point hitch.

    

All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights.
Tubeless Ag Rib Implement Tires  

Size

31 x 13.5-15

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.