New Holland Haybine® 18HS

NH Haybine18HS 2015

Windrower Headers

 

MORE HIGH-PERFORMANCE HEADERS

Powerful Speedrower® SP Windrowers allow you to drive a wide variety of high-performance headers. Choose from two powerful disc headers—the Durabine™ 416 with a 16’ 1” cut, or the Durabine™ 419 with an industry-widest 19’ 4” cut. New Holland offers a large selection of draper headers—from 25 to 40 feet wide. Haybine® sicklebar headers have a legendary history of top cutting and conditioning performance, and are available with a 14, 16 or 18foot cut.

Model Haybine® 18HS
Header drive  
Cutting width ft. in. (m) 18’ 3” (5.56)
Overall width ft. in. (m) 20' 3" (6.17)
Approximate weight lbs. (kg) 4370 (1983)
Versions available -
Windrow/swath width in. (mm) 38-96 (910-2438)
Cutterbar  
Cutterbar type Timed, dual, counterstroking sickles, Open, dual, wobble drive
Knives Over serrated, bolted knives with 2-tine, double-hardened guards
Knife speed 1810 spm
Sickle stroke in. (mm) 3 (76)
Flotation -
Cutting angle and height, degrees, in (m) Neg. 6 to neg. 12 degrees, 1.2-6.2 (30.5-157.5)
Header ground clearance - bottom of skid shoes in. (mm) -
Reel  
Reel Choices (SF = steel fingers, PF = plastic fingers) 5-bat
Speed range rpm 52-83 mechanical, 0-76 optional hydraulic drive
Drive Belt & chain
Raptor Draper Belts  
Belt width and construction -
Belt/roller guide design -
Roller design -
Speed range ft. (m) -
Cleat design and height in. (mm) -
Chaff barrier seal design -
Belt angle degrees (@minimum cutterbar tilt) -
Auger  
Type Floating
Maximum diameter in. (mm) 20 (508)
Flighting depth in. (mm) 5 (127)
Conditioner (Rolls)  
Type Chevron-design, intermeshing molded rubber, steel or high-contact rolls
Length in. (m) 102 (2.6)
Roll speed rpm 717
Roll pressure Torsion-bar roll pressure system adjusts with a single crank, rolls separate automatically “on the go” to allow thick material to pass
Roll gap Adjustable stop bolt
Conditioner (Flails)  
Length in. (m) -
Speed rpm -
Hood position -

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.