Case IH Farmall® Utility 65A

Double tap to zoom

 

Features

Performance. Value. Versatility.
The Farmall® Utility A series tractors will feature three new models — 55A, 65A and 75A ― all with a comfortable cab option. The Farmall Utility A series tractors are efficient all-around chore tractors perfect for any farm in any weather.

Engine

Power and Performance
A turbocharged, electronically controlled engine features 3 cylinders and a tunnel block design that ensures ruggedness and easy maintenance without sacrificing power, efficiency or performance. Six available models range from 53 to 75 hp (46 to 62 PTO hp)

Common Rail Direct Injection
An electronic high-pressure common rail fuel system precisely meters fuel as power demands, delivering both performance and fuel efficiency. This fuel system also provides improved throttle response, fast recovery to load and quieter engine operation with less vibration.

Tier 4 B/Final Compliant
Engines use an internal Exhaust Gas Recirculation (EGR) system to meet Tier 4 B/Final requirements.

Transmission

Easy to Shift, Easy to Operate
Farmall Utility A tractors feature a simple, straightforward 8x8 mechanical transmission that’s easy to operate. Also available is a 12x12 power shuttle. This increases efficiency and is an especially valuable convenience when doing loader work.

Optional Creeper Transmission
Creeper Transmission Option Copy: An optional creeper transmission can be added to the 12x12 transmission of Farmall Utility A tractors. This adds eight very slow forward speeds and eight very slow reverse speeds, providing a 20x20 transmission for operational speeds as slow as 6 feet per minute.

Specifications

Make Case IH
Model Farmall 65A (2019-Present)
Engine Performance  
Advertised Engine Power, Rated, hp (kW) 64 (48)
Maximum Engine Power, hp (kW) Same as advertised
Rated Engine Speed, rpm 2300
Power Boost, hp (kW) No boost
Fuel Tank capacity, gal (L) 21.7 (82)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) No DEF
PTO Performance  
PTO Horsepower, Basic / Optional Transmission, hp (kW) TBD
PTO Speeds, rpm 540 std; 540/540E opt.
PTO operational Type (Independent; Live; Continuous) Independent
Basic Engine  
Engine Make Case IH FPT
Engine Model S8000 Series
Number of Cylinders 3
Displacement, cu in (L) 179 (2.93)
Engine Bore, in (mm) 4.09 (104)
Engine Stroke, in (mm) 4.53 (115)
Block Design, Replaceable Liners Parent bore
Aspiration, Turbocharged or Naturally Aspirated Wastegate turbocharged, aftercooled
Fuel System  
Fuel System Description High pressure common rail
Fuel System Control, Electronic or Mechanical Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment  
Emission Level, US EPA Tier Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) No
Exhaust Gas Recirculation (EGR) Internal EGR
Cleanup Catalyst (CUC) No
Diesel Oxidation Catalyst (DOC) DOC standard
Diesel Particulate Filter (DPF) Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal Vertical stack
Cooling System  
Fan Drive Type Belt, fixed ratio
Electrical System  
System Rating, Volts 12
Alternator Rating, Amps 120
Basic Transmission Configuration  
Manufacturer's Description 8Fx8R Mechanical Shuttle
Transmission Type 4 gears plus High-Low Ranges
Number of Forward / Reverse Speeds 8F / 8R
Maximum Speed Forward, mph (kph) 18.6 (30)
Creeper Range Available See 12x12 w/ creeper option
Shuttle (Forward-Reverse) Available Mechanical synchro-shuttle std.
Optional Transmission 1  
Manufacturer's Description 12x12 Power Shuttle
Transmission Type 3 ranges, 4 gears; 25 mph (40 kph) w/MFD
Number of Forward / Reverse Speeds 12F / 12R
Optional Transmission 2  
Manufacturer's Description 12x12 w/opt. creeper
Transmission Type 8 additional creeper speeds
Number of Forward / Reverse Speeds 20F / 20R
Wheel or Track Configuration  
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer Front Steer
Rear Axle Assembly  
Final Drive Location and Description Inboard planetary
Axle Output End, Flange or Bar Flange
Axle Bar Diameter, in (mm) No bar axle
Front Axle  
Suspended Front Axle Available No
Brakes  
Service Brake Type Wet disc
Hydraulic System  
Hydraulic System Type Open center
Main Hydraulic Pump Type Dual gear pumps
Implement Pump Flow, gpm (Lpm) 12.6 (47.7)
Optional Pump Flow, gpm (Lpm) No option
Number of Standard Remote Valves 2 std.; 3rd opt.
3-Point Hitch Features  
3-Point Hitch Category Category 1 / 2
Optional Hitch Category No option
Draft Sensing or Lift Control Draft and Position control, top link sensing
Draft Link Ends Telescopic Yes, standard
3-Point Hitch Lift Capacity  
Standard Lift Capacity 24 Inches behind pin, lb (kg) 4,299 (1950)
Optional Lift Capacity 24 Inches behind pin, lb (kg) 4,740 (2150)
Standard Lift Capacity at lift pin, lb (kg) 5,952 (2700)
Optional Lift Capacity at lift pin, lb (kg) np
Drawbar  
Drawbar Description Swinging, extendable
Wheelbase / Trackbase  
Wheelbase, 2WD, in (mm) 82.1 (2085)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) 83.6 (2123)
Length  
Length, 2WD, incl. Hitch/Drawbar, in (mm) 151.8 (3856)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) 151.8 (3856)
Vertical Dimensions  
Height to Top of Cab, in (mm) 100.2 (2545)
Height to Top of ROPS raised, in (mm) No open ROPS
Width w/Tires or Tracks  
Overall Width, with standard wheels or tracks, in (mm) 61.5 (1562) flange to flange
Weight (w/Tires or Tracks)  
Weight, 2WD w/ROPS, lb (kg) No open ROPS
Weight, MFD/4WD w/ROPS, lb (kg) No open ROPS
Weight, 2WD w/Cab, lb (kg) 6,173 (2800)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) 6,834 (3100)
Weight, Total allowable, w/maximum ballast, lb (kg) 7,848 (3560) w/opt. ballast
Tire / Track Size  
Front Tire Size, 2WD 9.5L-15 F2
Front Tire Size orTrack Width, MFD/4WD or Track 11.2-24 R1 or R1W Ag
Rear Tire Size or Track Width 16.9-30 R1 or R1W Ag
Sales Literature  
Literature Number CIH18072701
Literature Date 8/1/2018
Secondary Literature Source  
Secondary Literature Number TA-1519-18
Secondary Literature Date 8/1/2018
Other Documentation  
Document Number --
Document Date --
Status and Entry Dates  
Manufacturing Status, Current or Archive Current
First Entry Date 8/24/2018
Revision Date --